• Combination hammer with 2 functions: hammer drilling and chiselling
  • Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Optional 30% impact reduction setting for working with more pliant materials
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
  • Lockable switch for comfortable working in continuous operation


  • Characteristics

    Max. single blow energy (EPTA)

    8.5 J

    Maximum impact rate

    2840 /min

    Rated input power

    1300 W

    Drill-Ø concrete with hammer drills

    45 mm / 1 3/4 "

    No-load speed

    0 - 300 /min


    90 Nm / 796 in-lbs

    Bit retainer


    Collar diameter

    66 mm / 2 19/32 "

    Weight (without power cable)

    6.7 kg / 14.8 lbs

    Cable length

    6 m / 20 ft m


    Hammer drilling concrete

    11.5 m/s²

    Uncertainty of measurement K

    1.5 m/s²


    9.7 m/s²

    Uncertainty of measurement K

    2.4 m/s²

    Noise emission

    Sound pressure level

    96 dB(A)

    Sound power level (LwA)

    107 dB(A)

    Uncertainty of measurement K

    3 dB(A)

© 2019 by Detroit Diamond Drilling. Proudly created with Wix.com

  • facebook